Novice and Novice Hardbody rules Indoor Motor Sports

BODY: All 4.5” JK Nascar .010" type bodies (no shortnose) in Nascar style only for vacform and 1990s Revell Monogram Monte Carlo, Pontiac, Thunderbird, Buick and Lumina ONLY for hardbody. Rear height of bumper not to exceed 1/2” from tech block. All bodies mounted with Velcro only and must be taped on for racing. All molded body lines must be present, ie., bumpers, grilles, etc. Tape is allowed ONLY at: front bumper- 1 strip, rear bumper- 1 strip, both sides- 1 strip at body mount only. Must resemble Stock car with 3 numbers and cluster decals. May not add any form of wing or tape, or anything to outside of body other than lane stickers. May use shoe-goo to reinforce hardbody and we recommend it. Door height must not be lower than 1-1/16" from top of door panel to bottom of chassis at all points on door. No raking of body. No modern or Fusion bodies allowed as there aren't enough to go around.

MOTOR: Proslot Stock 16D 2002 sealed only for vacform and Super 16d sealed 2003 motor for hardbody. No built motors. Shrink wrap must be clean and undamaged. No modifications allowed. No Bigfoot brushes. No aftermarket springs.

INTERIOR: Must be as full as car body allows. Complete interior with no more than 4 pieces of tape to hold it in.

TIRES: Any black rubber rear 7/8” (or .875) tires allowed. No big hubs. Must have scale size 13/16” front wheels & tires on 1/8” axle. May not exceed maximum width of 3-1/4” anywhere on car or tires.

GEARS: Any 31T crown gear with a 9-tooth only pinion.

AXLES: Stock axles in 1/8 only”

CHASSIS: Must be production stock commercially available out of the bag 4.5” GRC Brass pan chassis. May solder ONLY motor mount, and axle oilites. May not modify chassis from it’s stock form, ie., no stiffening, no extra soldering, or no drilling. ENTIRE CHASSIS must clear 1/16” tech tool from front to rear at the beginning of each heat. Do not bend your guide down as we will NOT pass it. Use our tech tool and block before the race for best results. May add stick-on lead weights as necessary to improve performance on Tri-oval track.

DURING THE RACE: No Driver changes. May not change body nor chassis setup. May change guide, tires, motor and other needed parts damaged by racing only. Motor will be re-teched at end of race. 1 piece of tape may be applied under the front wheelwell opening to correct race damage only. REMEMBER 1-strip only! If car body rips during the race to expose interior it will be black-flagged.

There will be a 3-lap penalty for the following: Profanity, or throwing a controller or car during active racing. If you argue with the race director you will lose your Race Bucks and they will be given to next racer in line. Wait until AFTER the race to protest unless there is a track malfunction! No chemicals may be set on track. No gluing of track or excessive gluing of cars during racing. No spray chemicals or lighter fluid allowed!! Bring a friend to track marshall and always thank your track marshalls!

Thanks for racing at INDOOR MOTORSPORTS!

Welcome to Indoor Motorsports Auto Parts & Slot Car Webstore. WE SHIP WORLDWIDE. WE BUY OLD SLOT CARS. We are a business selling Auto Parts/Slot Cars/Hobbies/Speed Parts & Truck Accessories located at 5 W. Williamsburg Rd. in Sandston Va. & accept all major Credit Cards direct & through Paypal for security. YOU DO NOT Have to join paypal to use it as a one time payment for your credit card and you get Buyer Protection! You can also pay with checks & money orders. We sell the coolest stuff on the planet and have been serving slot car racer's & collector's for over 25 years since 1987 as a legitimate Hobby & Toy liquidator specializing in slot cars as we own several slot car tracks. Come race on our 72' large Superpower Hasse Nilsson 8-lane Tri-oval on Thursday and Friday nights and by appointment for your group or birthday party. Our shipping rates are VERY reasonable and most orders only cost $5.95 to ship! (Ready to run cars usually cost only $1- $2 each extra so buy in quantity and save $$ on S&H) We ship WORLDWIDE too- ALL FOREIGN ORDERS REQUIRE ADDITIONAL S&H - Please purchase one S&H pack from the SHIPPING PRICES AND PACKS CATEGORY for your country when ordering as it will not be automatically added in as with a USA order. We are dinosaurs and sell "alot of slot", new and old, so check back often as we add new items weekly! Buy with confidence. And we are quiet for late night shopping too! If you don't see what you are looking for in the store, we sell alot of items made in the last 40 years not listed every day so please give us a shout at the email link below for all your slot car needs & the hottest stuff. All emails cheerfully answered in order that they came. We are in business to serve you and will always try our best to satisfy you. We stay very busy so please always allow AT LEAST 10-14 days for processing your order & shipping your Novice and Novice Hardbody rules item as most products we carry are made to order for us, although most orders ship within 7-10 business days from our large inventory. Customer responses like "...I will like always, continue to buy your superior products. Thank you, Don" keep us at the top of the Industry in sales. We pack with the Utmost in Professional care, so rest assured you will be getting the best and freshest product there is undamaged. We buy old slot cars and automotive related toys so email us at the link below for a quote for your old toys! ALL S&H quoted for orders is USA USPS ONLY. Please read each item description carefully for specific information. SATISFACTION GUARANTEED! We will gladly exchange any defective or accidentally misrepresented current production items with merchandise of equal value. Warehouse and Estate clearance items are all sold as-is. No Refunds or Warranties on electrical products or made to order items.

www.indoormotorsports.com
Questions on this Novice and Novice Hardbody rules item, email at imslot@aol.com

View the complete list of our Slot Cars, RC Cars, Model Parts And More